Filter
Top Products
FEATURE USE
CALL FORWARD-ALL CALLS
CALL FORWARD-BUSY (continued)
For Intercom and CO line calls (all calls will forward to a selected
station at all times-your station will not ring when called).
TO SET CALL FORWARD-ALL CALLS
1) Press the m button (or dial m 1 m 0).
l
CFAC LED flashes (or hear confirmation tone).
2) Dial the station number to which calls will forward.
l
Listen for confirmation tone if 110 was dialed.
3) Press the m (or m button.
l
CFAC LED on steady.
l
Calls will forward to stored station number.
TO CANCEL CALL FORWARD-ALL CALLS
Press the m button (or dial m [I 0).
l
CFAC LED goes off (or hear confirmation tone).
l
Press SPKR button if INT 6 0 1 was dialed.
NOTE:
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will not forward.
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
CALL FORWARD-BUSY (Release 2 and higher)
When your station is busy, all calls will forward immediately.
When your station is idle, calls will ring at your station as usual.
TO SET CALL FORWARD-BUSY
1) Press the m button (or dial m B w I).
l
CFB LED flashes (or hear confirmation tone).
2) Dial the station number to which calls will forward.
l
Listen for confirmation tone if 111 was dialed.
3) Press them (or m button.
l
CFB LED on steady.
l
Calls will forward to stored station number.
TO CANCEL CALL FORWARD-BUSY
Press the m button (or dial m 1 m i).
l
CFB LED goes off (or hear confirmation tone).
l
Press SPKR button if INT 6 0 2 was dialed.
NOTE:
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will not forward.
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
CALL FORWARD-NO ANSWER (Release 2 and higher)
For Intercom and CO line calls (all calls will forward to a selected
station whenever your telephone is not answered within 12
seconds or three rings, whichever occurs first).
TO SET CALL FORWARD-NO ANSWER
1) Press the m button (or dial m 11 B.
l
CFNA LED flashes (or hear confirmation tone).
2) Dial the station number to which calls will forward
l
Listen for confirmation tone if B 11 was dialed.
3) Press the m (or m) button.
l
CFNA LED on steady.
l
Calls will forward to stored station number.
TO CANCEL CALL FORWARD-NO ANSWER
Press the m button (or dial m 11 I).
’
l
CFNA LED goes off (or hear confirmation tone);
l
Press SPKR button if INT 6 0 3 was dialed.
26
‘.. ,;:
27
. . .
..A