Filter
Top Products
iTEF
1
2
3 Enter Action Code 1
4
5
REMOTEADMlN&MAlNTPROCEDURES
SECTION 200-096-600
FEBRUARY1991
TABLERM-AC
PROGRAM93
CO LINE IDENTIFICATION
ACTION
Enter Program Mode
At the >MODE prompt, enter u m H H
q
.
Enter Program Number 93
Press
q
.
Refer to the System Record Sheet and enter the appropriate
CO line number.
Example: CO line 2, enter i 1 .
The system will display previously entered identification
characters (up to 16 characters).
Refer to the System Record Sheet and change identification
if required: 00.. . . . . . . . .[70 (16 characters maximum).
Example: OVERSEAS.
To Exit Program/Store Data
A) To store data, press
q
.
B) Continue returning to step 3 until all data has been entered
for this program.
C) To exit this program, press 1 1
q
DISPLAY/PRINTOUT
>MODE PROG
P
I? 93
P93
p93 I 02
r-m fupfo 76)
L Current I.D.
P93 1 02 non (upto 16)
OVERSEAS
P93 1 02 nnn lupto 76)
OVERSEAS
pg3 ##
P
NOTE:
Use m to clear characters.
TABLERM-AD
PROGRAM45-1
TOLL RESTRICTION DIAL PLAN
STEP1
ACTION
I
DISPLAY/PRINTOUT
1
Enter the Program Mode
>MODE PROG
At the >MODE prompt, enter w 0 1 H
q
. P
2 Enter Program Number 45
P 45
Press
q
. P45
3
P45 1 1
Enter the number 1.
The system will display the present dial plan code number (1 - 5).
4
Refer to the record sheet and enter the required code number.
P45 1 1 2
Example: Code 2, enter 1 .
5 To Exit Program/Store Data
A) To store data, press
q
.
8) To exit this program, press 1 1
q
.
P45 1 1 2
P45 # #
P
-33-