Filter
Top Products
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
RELEASE 3 (R3) SOFTWARE GUIDE (continued)
All items available with RI and R2 software are available with R3
software; items listed below are available with R3 software only.
Item Description *Related Programs Comments
Emergency number override of
verified/forced account code
44A (51 - 53)
-
Allows up to three emergency numbers
(911, etc.) to be programmed to bypass
the forced (verified or nonverified) account
code dialing requirement.
Traveling class of service
44B (1 - 4)
-
This feature allows a toll restriction
override code to be assigned to each
station class (class 1 - 4). When the toll
restriction override code is dialed from a
telephone, the telephone will assume the
class the code is assigned to until the call is
complete. The telephone will return to its
normal class when the call is complete.
B button
39, Code 50
Flexible button, allows voluntary account
codes to be entered anytime without
interrupting existing conversations.
Amplified Conference
(External)
10-1, LEDs 01 - 04
10-2, LEDs 18 and 19
10-3
Allows up to four customer-supplied
amplifiers to be connected to selected
system PEKU ports. The amplifiers
automatically switch into two CO line
(Tandem) and two CO line/station
conference calls. The amplifiers increase
the transmission volume level that is
typically degraded because of added
telephone network losses during two CO
line calls. Two line DISA and TIE line
calls are also amplified.
Flexible BGM connection
12, IO-3
Allows alternate BGM source and
external page output connection to any
slot with a PEKU or PESU installed.
*All program numbers are underlined in this column.
2-40