Filter
Top Products
CONFERENCE CALLS
CONFERENCE CALLS
(continued)
8
TO CONFERENCE UP TO THREE STATIONS ON ONE CO
LINE
While connected to an established CO line call (incoming or
outgoing):
1) Flash the hookswitch.
l
You will hear intercom dial tone.
l
The existing call will be on hold.
2) Dial the number of the desired station.
3) Flash the hookswitch after the party answers.*
l
All parties will be conferenced.
4) Repeat to add another station. (Two stations, plus yours,
and one CO line is maximum.)
5) Hang up when the call is completed.
TO CONFERENCE UP TO FOUR STATIONS ON INTERCOM
1) Establish a standard two-station intercom call.
2) Flash the hookswitch.
l
You will hear intercom dial tone.
l
The existing call will be on hold.
3) Dial the number of the desired station.
4) Flash the hookswitch after the party answers.*
l
All parties will be conferenced. /
5) Repeat steps 2
* 4 one more time, if necessary to add
another station.
6) Hang up when the call is completed.
*Called party must come off-hook or depress the m
button. If you receive a busy tone or no answer, return to
the original connection by flashing the hookswitch.
TO CONFERENCE UP TO TWO STATIONS AND TWO CO
LINES (Release
2 and higher)
While connected to an established CO line call (incoming or
outgoing):,
1) Flash the hookswitch.
l
You will hear intercom dial tone.
l
The existing call will be on hold.
2) Dial the access code ( )
for another CO line.’
3) Dial the desired telephone number of the second party.
4) Flash the hookswitch after the party answers.’
l
All parties will be conferenced.
5) To connect another station flash the hookswitch.
l
You will hear intercom dial tone.
l
The existing calls will be on hold.
6) Dial the number of the desired station.
7) Flash the hookswitch after the party answers.2
l
All parties will be conferenced. (Two stations, includ-
ing yours, and two CO lines are maximum.)
8) Hang up when the call is completed.
NOTES:
1. All access codes are allowed depending on system
programming: 70 1 N 736, line numbers; 81 m 88, line
group numbers; or 9, for LCR or general group, with
Release 2 and higher.
2. If the second outside patty does not answer or is busy,
hang up to receive an immediate recall from the first
Party.
3. While the conference is being set up, all outside parties
are held separately and cannot converse with each
other.
4. If a 4-party conference is set, either inside station will
maintain the conference if the other hangs up. But one
station must remain in the conference to maintain the
outside connections.
9