Toshiba DK96 Telephone User Manual


 
PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
RELEASE2(R2)SOFTWAREGUlDE (continued)
With the exception of Busy and Group Station LCD Messaging, all items available with RI software
are available with R2 software; items listed below are available with R2 software and abbvi! only.
Item Description
80/160 DTMF
option for
VM ID
Codes
Immediate drop when Toll
Restricted digits are recognized
CO line, incoming ring detector
time change: (120/223 ms)
ABR overrides Program 41
Change RM prompt from DKTS
Version 1 .O to DK Connect
Message waiting cancel from
voice mail port only by:
Dial 64 and station number
Operation change when sending
“D” tone to VM
*Related Programs
1 o-2
None
10-1, key 18
None
None
10-2, key/LED 4
None
Comments
Allows Voice Mail auto digits to be sent at 80
or160ms
Call
drops as soon as a restricted number
sequence is detected
Changes CO ringing detect time to
eliminate false ring-ins from some COs
Allows ABR to function with all LCR
program configurations
Changes Remote Maintenance prompt
to verify that IMDU connection is made
Deletes auto-cancel of MW LED when VM
answers a call from a station that has
MW LED from voice mail
Prevents disconnects when VM device
does not recognize “D” tone to drop
connection
Ring detect time option
Two-CO line via access
code or LCR
DTMF tone return
l
Manual dialing
l
Voice mail I.D. auto digits
(dial codes 656 and 657)
l
Speed dialing
10-J, key/LED 18
None
10-2, key/LED II
Ring detect time INITIALIZES TO NORMAL
to eliminate
CO line false rings
Allows two-CO line conference to be set up
from electronic and standard telephones via
81 - 88,701 - 736, and LCR dial 9
Deletes DTMF tone returned to electronic
telephones when manual dialing and
speed dialing; deletes DTMF tones from
callers when the called station forwards
the call to voice mail. DTMF digits are still
sent out to CO line and voice mail ports.
Call forward backup memory
92-J key/LED 03 and 04 Clears call forward backup memory when
system is first initialized
Call forward memory save
None
Station call forward information is retained
during system power down; when power is
returned, stations will forward as before
power loss.
CO line reseize guard time option
lx, key/LED 02
42-0, key/LED 01 - 36
Allows CO line reseize guard time to be
changed from 0.45 seconds to 1.5 seconds
to meet
central office and CENTREX seize/
hookflash timing requirements
*All program numbers are underlined in this column.
2-37