Filter
Top Products
FEATURE USE FEATURE USE
TOLL RESTRICTION OVERRIDE/TRAVELING CLASS
(continued)
l
You no longer hear dial tone.
4) Dial the Toll Restriction Override Code (four digits).
l
You hear dial tone.
5) Dial the desired telephone number.
* Or press the m button and dial access a CO line.
TO ADD, DELETE, OR CHANGE TOLL RESTRICTION
OVERRIDE OR TRAVELING CLASS CODES FROM
STATIONS SELECTED IN SYSTEM PROGRAMMING.
1) Press m and dial the three-digit toll restriction override
change access code CI a Q 2.
l
You hear confirmation tone.
2) Dial the four-di it override code L;I Cl Ci CI.
3) Press the B or - D A
ibm
button to store code.
l
You will hear confirmation tone.
4) Repeat steps 1 w 4 to enter more toll restriction override or
traveling codes.
NOTE:
For security reasons, the change access code is not
provided in this guide. It is available from your telephone
sys tern maintenance provider.
TONE SIGNALING
PROGRAMMABLE OPTION
Provides rtnging on incoming intercom calls when voice an-
nouncing is not activated.
TO MAKE A TONE SIGNAL CALL
1) Call another station via intercom.
l
The called party hears one ring, then our voice.
2) To send ring tone to the called party, dial
i
.
3) Speak to the party when the call is answered.
TONE SIGNALING PROGRAMMABLE OPTION (continued)
TO ANSWER A TONE SIGNAL CALL
1) Lift the handset or press the m button (handsfree
answerback is inoperative).
2) Hang up when the call is completed.
VOICE MAIL (VM)
Whenever your station is call forwarded to voice mail, certain
digits will automatically be sent to the voice mail unit to direct the
call to your voice mail box.
TO STORE THE DIGITS TO BE SENT
1) Press the m button.
2) Dial 111.
3) Dial the di its (u to 16 and pauses to be sent (see Note).
4) Press the\ (or w) button to store data.
NOTE:
Use m or= button to store pauses.
When you wish to retrieve your messages from voice mail,
certain digits will automatically be sent to the voice unit to play
back your messages after you press the message waiting button.
TO STORE THE DIGITS TO BE SENT
1) Press the m button.
2) Dial BRi.
3) Dial the re uired di its and pauses to be sent.
4) Pressthei(or&)buttontostoredata.
TO RETRIEVE MESSAGES
Press the m and m buttons.
TO CLEAR ALL DIGITS
1) Press m.
2) Dial~~Ior~~~.
3) Press 1 (or m).
53