Filter
Top Products
Port
k
Seconds
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
PROGRAM 34
HOLD/PARK RECALL TIMING
SELECT = Port Number (00-95) HOLD TIME = Seconds
Enter the port number having Enter the number of seconds the
its Hold/Park Recall Time defined.
system will wait. Use three digits,
See Note 4 for entering a Acceptable range is 000 or
range of ports. 011-160. See Note 3.
i
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns a Hold/Park recall time of 032 seconds to al/ports.
3. Enter 000 for no hold recall. Enter 0 11% 160 for 11 to 160 seconds.
4. Enter a range of ports by keying in the following sequence:
00~00
/
Lo’w port
High port
2-77