Filter
Top Products
Calling Number-Intercom
When you receive an intercom call, the
calling station’s number is displayed.
J)
CO Line Identification
I
DR. JONES OETICE
I
The CO lines can be programmed to
display an identifying name of up to 16
characters. The name will be displayed
on outgoing and incoming calls.
K)
CO Line Number
SUMMARY OF LCD FUNCTIONS
(continued)
Your LCD telephone displays informa-
tion noting that your call to station NNN
was picked up by station NNN.
1) Incoming Call
m
Incoming CO call-If your station is pro-
grammed for incoming ringing on that
CO line.
Transferred CO call-CO line is trans-
ferred to your station in the ringing state
by another station.
Camped-on CO call-CO line was
camped-on to your busy station and rings
your station when you hang up.
2) When Call Is Answered
The display changes to indicate calling
R status.
3) Hold
You have put a CO line call on hold at
-1 your station.
SUMMARY OF LCD FUNCTIONS
(continued)
4) Hold Recall
Held call automatically recalls your sta-
tion after a programmed period of time.
5) Outgoing
(
When you manually select a CO line, it is
displayed. This display is replaced by the
dialed number as you dial.
6) CO Line Queuing (Callback)
When the CO line queuing feature rings
back to your station with an available CO
line, that line number will be displayed.
L) Date/Time
I. Press them button to display
date/time when talking on a CO
line.
2. The date/time is adjusted on a
system-wide basis by the station
located in port 00 (usually station
200).
M) Dialed Number
1) CO Line
The digits are displayed as you dial over
m 1 Manual
dialing
erther a CO,lrne or the intercom using:
l
Automatic dialing
l
Repeat last number dialed
l
Saved number redial