PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
PROGRAM 42-O
CO LINE TO PBX/CENTREX CONNECTION
SELECi = 0
Spe‘cify CO lines by
setting
key
LEDs as defined by the table
below.
NOTES:
1. For more
information, see the irtstructions preceding the record sheets.
2.
Initialized data reads all LEDs OFF for all CO lines.
I
3. This progam must be utilized to allow CENTREWPBX (after flash) features to operate.
4. If CO line is programmed for behind CENTREWPBX (LED ON), re-seize guard time is 1.5 seconds. If CO line
is programmed for normal operation guard time is
0.45
seconds.
See Program
10-1, Key/LED
02 (Release 2
and above).
2-92
,’