Filter
Top Products
MESSAGE SENDING
(continued)
MESSAGE. SENDING
(continued)
NOTE:
Group calling station messaging allows you to set a calling
station message
for on/y
one station
at a time.
7) Press the mmq button.
l
The LCD displays. MODE NO.?
8)
Dial 1.
l
Your LCD shows the time and date.
l
The message is displayed at the “destination” station.
l
Any station calling the “destination” station receives the
message.
TO SET A MESSAGE IF YOU DO NOT HAVE Am BUTTON
1) Press the m button.
l
The INT LED lights.
2) Dial ma.
3) Dial the number of the message you want (see Note).
4) Press the m button.
l
The INT LED goes out (your message is now stored).
NOTE:
Persona/ (70 - 79) and system (60 - 99).
TO CANCEL A MESSAGE THAT HAS BEEN SET AT YOUR
STATION
Press the m button.
l
The MSG LED goes out.
TO CANCEL A MESSAGE IF YOU DO NOT HAVE A m
Bull-ON \
1) Press the m button.
l
The INT LED lights.
2) Dialmg. -
3) Press’ the m button.
l
The INT LED goes out.
BUSY STATION MESSAGING
(Releases 1 and 3 only)
When reaching a busy LCD station, a message can be sent to that
station (an audible tone will be heard). The busy station may also
return a message to the calling station’s LCD. The two stations may
continue this procedure to carry on a “silent” conversation.
TO SEND A MESSAGE TO A BUSY STATION
1) Call the desired station.
l
Listen for busy tone.
2) Press the m button.
l
The LCD displays, MODE NO.?
3) Dial I.
l
The LCD displays, OVER TO STNN MSG NO?
4) Enter the desired message number.*
l
The LCD displays the message.
5) Press the m button.
l
The LCD displays, MSG SEND.
6) The destination station beeps four times and the message is
displayed for 30 seconds, or until originating station hangs up.
*Personal (10 - 19) and system (60 - 99).
TO RETURN A MESSAGE (Within 30 Seconds) FROM THE
BUSY STATION AFTER RECEIVING A “BUSY STATION”
MESSAGE.
1) Press the m button.
l
The LCD displays, MODE NO?
2) Dial 1.
l
The LCD displays, OVER TO STNN MSG NO?
3) Enter the desired message number.*
l
The LCD displays the message.
4) Press the m button.
l
The LCD displays, MSG SEND.
NOTE:
A personal message (10 - 19) will remain stored in memory.
30
31