Filter
Top Products
CALL FORWARD DISPLAY
(continued)
STATION-TO-STATION MESSAGE WAITING
(continued)
5) To clear the MWIFL LED from the calling statio
button, dial the station number and press the
twice (or 0 I).
3) Call Forward-No Answer (Releases 2 and 3)
Press~~~~+ N N N +m
(or=+ N N N +m).
4) Call Forward-Busy/No Answer (Releases 2 and 3)
PressmiII+NNN+m
(or=+ N N N +m).
5) Call Forward-Fixed
Press the m button.
NOTES:
1. Tocancelcallforward,press~~~[~(orpressthe
call forward button used to set call forward).
2. If call forward is set:
l
CO lines that ring at your station only will forward (CO
lines that ring into more than one station will not forward).
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
l
Call forward redirects the station hunt feature.
STATION-TO-STATION MESSAGE WAITING
TO USE STATION-TO-STATION MESSAGE WAITING
1) Lift the handset.
2) Dial the desired station number.
l
If there is no answer (busy or DND), press the m
button (or dial 0). This causes the MW/FL LED on the
called station to flash.
l
The called station’s LCD displays the calling station’s
number.
3) The called station user presses them and m buttons to
return, the call.
4) To clear the MW/FL LED from the called station, press the
m button.
NOTE:
Up to four message waiting displays may be stored on the
LCD. Thestationnumberin the left-mostposition willbecalled
when the m button is pressed. To rotate the station
numbers, press the m button. The fourth message is re-
served for the Message Center.
VOICE MAIL (VM)
Whenever your station is call forwarded to voice mail, certain digits
will automatically be sent to the voice mail unit to direct the call to
your mailbox.
TO STORE THE DIGITS TO BE SENT
1) Press the m button.
2) Dial Iii.
0 The LCD disolavs. 6 5 6 ID CODE SET.
3) Dial the digits (up toi 6) and pauses (m) to be sent.
l
The LCD displays the digits and pauses.
4) Press the m button to store data.
0 Listen for confirmation tone.
When you want to retrieve your messages from voice mail, certain
digits will automatically be sent to the voice mail unit to play back
your messages.
TO STORE THE DIGITS TO BE SENT
1) Press the m button.
2) Dial iii.
l
The LCD displays, 6 5 7 ID CODE SET.
3) Dial the required digits and pauses to be sent. ’
l
The LCD displays the data as it is entered.
4) Press the fl button to store data.
0 Listen for confirmation tone.
15