Filter
Top Products
GENERAL INFORMATION
GENERAL INFORMATION
BUlTON DESCRIPTIONS
BUTTON DESCRIPTIONS (continued)
ACCOUNT CODE BUTTON B (Release 3 only)
Allows a station user to enter a voluntary account code anytime
during a CO line call without interrupting the conversation.
ALARM RESET BUTTON m
A station programmable option that will turn off the electronic
telephone alarm if connected to a facility alarm mechanism.
ALL CALL VOICE PAGE BUTTON
q
A single dedicated button that allows a station to voice page all
of the electronic/digital telephones in the system simultaneously.
AUTOMATIC BUSY REDIAL BUlTON m
Allows the user to set up an Automatic Busy Redial after
receiving busy tone on a dialed CO line call.
AUTOMATIC CALLBACK BUTTON m
Recalls a busy or Do Not Disturb station on intercom as soon as
that station becomes idle. Also used for CO line queuing.
BACKGROUND MUSIC BUTTON m
Allows background music to be switched on/off of the station
speaker.
CALL FORWARD-ALL CALLS BUTTON m
With this feature, all calls will forward to another station.
CALL FORWARD-BUSY BUTTONS (Release 2 and higher)
Whenever the called station is busy, this feature forwards calls
to another station.
CALL FORWARD-BUSY/NO ANSWER BUTTON m
(Release 2 and higher)
Whenever the called station is busy or does not answer prior to
a predetermined period, this feature forwards calls to another
station. lfthe called station is busy, the calls forward immediately.
All non-answered calls (station is not busy) forward after either
three rings or 12 seconds, whichever occurs first.
CALL FORWARD-NO ANSWER BUTTON m (Release 2
and higher)
Whenever the called station does not answer after either three
rings or 12 seconds, whichever occurs first, this feature forwards
calls to another station.
CALL FORWARD-FIXED BUTTON m
Sets Call Forward to a pre-assigned station. (The destination
station is assigned in system programming.)
NOTE:
CO line calls will forward on/y if the CO line is programmed
to ring at one station (and that station has set the Call
Forward feature). If a CO line is programmed to ring at more
than one station, the CO line will not forward.
CALL PICKUP BUTTON m
Initiates directed call pickup of CO line, intercom, and page calls.
CALL PICKUP BUlTONS m and m
If the system is shared by two tenants, the m button picks
up Tenant 1 ringing CO line calls and them button picks up
Tenant 2 ringing CO line calls.
CENTRAL OFFICE LINE BUTTON
q
Accesses an outside line.
CONFERENCE/TRANSFER BUTTON m
Sets up conference calls and also used to transfer calls.
DIRECT STATION SELECTION BUTTON(s) w
Causes a preselected station to ring by ressing an assigned
I&
button. The LED associated with each D button provides the
status (idle/busy) of the station assigned to the button.