PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM42-1-8
PBX/CENTREXACCESSCODES
SELECT = I-8 /- TCCESS CODE
=
PBX Access Code Group
Enter a P-digit access
Enter the PBX Group code for the group,
number 1 - 8 that needs as defined by the table
an access code assigned. below. See Note 3.
PBXZENTREX
Access Code
Number
2
I
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns no access codes to PBX groups.
3.
l
If access code is single digit, enter the first digit and press key/L ED
0
1
as second digit.
l
Press LED key 0 1 to delete a digit.
l
Press key/LED 02 for don’t care. For example, pressingI+ key/LED 02
allows 80 N 89.
4. This program must be utilized to allow correct toll restriction and CEN-
TREX/PBX transfer operation.
2-93