Filter
Top Products
FEATURE USE
FEATURE USE
HANDSFREE MONITORING
BACKGROUND MUSIC OVER EXTERNAL SPEAKERS
Calls placed on hold by the distant party may be monitored
handsfree.
TO USE HANDSFREE MONITORING
1) While connected to a call, press and hold them button.
2) Place the handset on-hook.
3) Release the m button.
l
Sounds from the distant party are heard via the
telephone’s speaker.
4) Lift the handset to continue the conversation when the
distant party returns.
ALARM RESET
A programmable option used with an optional alarm system to
on the system’s electronic telephone.
button resets the alarm signal on the
telephones.
BACKGROUND MUSIC (BGM)
If a BGM music source is connected to your system, you may
listen to background music via your station’s speaker, or over the
external page speakers.
TO LISTEN TO BGM ON YOUR TELEPHONE SPEAKER
Press the m button and dial g 10 (or press the m button).
l
Adjust volume with the VOL control on the front of your
phone.
TO CANCEL BGM ON YOUR TELEPHONE SPEAKER
Press the m button and dial a 11 (or press the m button).
NOTE:
Station number200 is the only station that can turn External
BGM On/Off.
TO ALLOW BGM OVER EXTERNAL PAGE
Press the m button and dial 110.
TO CANCEL BGM OVER EXTERNAL PAGE
Press the m button and dial 11 I.
DIRECT INWARD SYSTEM ACCESS (DISA)
When calling into your system from the outside on certain
telephone lines.
TO MAKE A DIRECT INWARD STATION CALL USING DISA
1) Using a DTMF telephone, call the DISA CO line telephone
number:--
2) Listen for the ringback tone signal, and then listen for the
intercom dial tone’ (if busy tone is received, try again).
3) Dial the intercom number of the desired station.
l
You will be connected when the station answers*,
. . . or. . .
l
If you receive busy tone or wish to dial another number
while ringing the station, press the a button to receive
dial tone, allowing another number to be dialed.
TO CALL THROUGH YOUR SYSTEM ON AN OUTGOING CO
LINE USING DISA (Release 2 and higher)
1) Using a DTMF telephone, call the DISA CO line telephone
number:--
2) Listen for the ringback tone signal, and then listen for the
STRATA DK intercom dial tone’ (if busy tone is received, try
again).
3) Dial the access code3 (
) of the CO line or CO line group
that is to be used to place the outgoing call.
4A) If a DISA security code is required4, dial the code and listen
for CO dial tone.5
38
‘.;:, ,:’
39