Filter
Top Products
GENERAL INFORMATION
GENERAL INFORMATION
BUllON DESCRIPTIONS (continued)
SPEED DIAL BUTTON
q
Provides single-button speed dial of personally assigned tele-
phone number.
SPEED DIAL (FIXED) BUTTON m
This button dials a pre-assigned number or Centrex/PBX feature
access code.
SPEED DIAL SELECT m
Provides access to station or system speed dial numbers.
TONE BUTTON m
Changes the outgoing dialing of the CO line in use from dial pulse
to tone signaling.
LED INDICATIONS
CO INCOMING CALL
A slow flash rate (l/2-second on-
l/2-second off) indicates the
CO line on which the call is ringing.
CONFERENCE
Avery fast flash rate (10 impulses per second (IPS)) indicates the
CO line presently in the Conference mode. Other stations’ LEDs
also show a steady (busy) indication for these lines.
EXCLUSIVE HOLD
A very fast flash rate (10 IPS) indicates the CO line is placed on
Exclusive Hold at the holding station. The LED is on steady
(busy) on all other stations.
LED INDICATIONS (continued)
INTERCOM CALL
A pulsating on/off flash rate (10 IPS for 1 second on and 1 second
off) appears on the INT LED at the station that is being called.
IN-USE
A steady, double flash rate (2 second on-l/8-second off-l /8-
second on-l/8-second off) indicates the CO line presently in
use at the station that originated the call. Other stations’ LEDs are
on steady for that time.
ON-HOLD
A fast (4 IPS) flash rate (l/8-second on-l /8-second off) indicates
the CO line placed on hold at the station. The LEDs of the CO line
on hold flash at a medium rate (3/4-second on-l/4-second off)
at the other stations. If using the Pooled Line button, the hold
indication is only at the station that places the call on hold.
HOLD RECALL
Aquickflash rate matching the tones (2 IPS for 1 second-l 0 IPS
for 1 second) reminds a station which line has been on hold for
the programmed period of time.
6