Filter
Top Products
Intercom Dial Tone
DESCRIPTION
There are two types of dial tones:
The MERLIN system internal dial tone and
the CO line dial tone. Some modems and software applications (Voice Mail
Service, for example) will not recognize the internal dial tone of the MERLIN
system. When a MERLIN system station is off-hook, the dial tone may
prevent some of these services from entering the system. The Intercom Dial
Tone feature allows you to change the internal MERLIN system dial tone to
match the CO line dial tone.
If any software applications or moderns used by the system do not recognize
the MERLIN II system internal dial tone, you will have to administer the
system so that the CO line dial tone will be detected.
CONSIDERATIONS
ADMINISTRATION
If you are running software applications or using modems that do not
recognize the internal MERLIN system dial tone, follow the appropriate
procedure below.
With a MERLIN II System Display Console
To change the dial tone using a MERLIN II System Display Console:
1 From the system menu, touch [More], [Options], [More], [More], [More] .
2 Touch
[ICMdial] .
3 Take the appropriate action:
Touch
[Internl] to provide the MERLIN II intercom dial tone, or
Touch
[Externl] to provide the CO line dial tone.
With a BIS-34D Console
To set the dial tone using a BIS-34D Console:
1 Touch Message.
2 Dial # 335
3 Take the appropriate action:
Touch 0 to provide the MERLIN intercom dial tone, or
Touch 1 to provide the CO line dial tone.
MERLIN II System Features
2-77