Filter
Top Products
4 To delete an area code or exchange from the Area Code/Exchange section
of a table:
a On the Tables screen, touch
[ARS-Inp] .
b Dial the table number (0 through 7) and touch
[Enter] .
c Dial the entry number (00 through 99) and touch
[Enter].
d Touch Drop.
e Touch
[Enter] .
5 To add pool number, other digits, and absorption codes, if required, to
the Pool, Absorb, and Other Digits section of a table:
a On the Tables screen, touch
[ARS-Pool].
b Dial the table number (0 through 9), dial the entry number (0 through
5), and touch
[Enter].
WARNING
In order to add pool number, other digits, and absorption codes, the
existing digits and codes as well as the entry pool number you are
about to dial have to be cleared out. The next step clears other digits
as well as the absorption code.
c Dial the entry (pool number) and touch
[Enter].
d Dial any other digits required.
e Perform the appropriate step:
➤ To add an absorption code to this entry, touch [Enter] and go on to
step f.
To enter the pool number for the next entry on this table, touch
[Next] and go back to step c.
f Dial an absorption code (0 through 5).
● 0
= none
● 1 = leading 1
● 2=
area code
● 3 = 1 + area code
● 4=
1 + exchange
● 5=
1 + area code + exchange
g Perform the appropriate step:
To administer the next entry for this table, touch
[Next] and go
back to step c.
To administer entries for another table, touch
[Enter] and go back
to step a.
6 To delete a pool number (action also deletes any other digits and
absorption type):
a From the Tables screen, touch
[ARS-Pool] .
b Dial the table number (0 through 9).
MERLIN 11 System Features
2-15