Filter
Top Products
HOW TO USE
To have your Hands-Free Unit go on automatically when you receive
intercom calls:
1 Touch Auto Answer-Intercom.
The green light next to the button goes on.
To return to answering calls yourself:
1 Touch Auto Answer-Intercom again.
The green light next to the button goes off.
Auto Intercom
DESCRIPTION
You can use an Auto Intercom button for one-touch dialing of intercom
numbers. Program any intercom number onto an Auto Intercom button and
use the button instead of dialing the intercom number.
CONSIDERATIONS
PROGRAMMING
HOW TO USE
● You cannot have both an Auto Intercom button and a Manual Signaling
button for the same person.
If you try to program both, you deactivate
the one that you programmed earlier.
1
2
3
To
1
2
To
1
2
3
2-12 MERLIN II System Features
● If you program this feature onto a button with lights, the green light next
to the button goes on when the person at that intercom number uses the
voice terminal or uses the Do Not Disturb feature. When the person calls
you, the light next to the person’s Auto Intercom button flashes.
To program an Auto Intercom button, label an available button (one with
lights is recommended, though not required), enter programming mode, and
follow these steps:
Touch the button you want to program.
Dial *91 plus an intercom number.
Program another feature or leave programming
place a ringing intercom call with one touch:
mode.
Touch the Auto Intercom button for the intercom number you want to
reach.
Your voice terminal speaker goes on and you hear ringing.
If the other person answers, lift your handset. If not, touch Speaker or
Speakerphone to cancel the call.
place announced intercom calls:
If the red light next to it is not already on, touch Intercom-Voice.
Touch the Auto Intercom button for the intercom number you want to
dial.
Your speaker goes on and you hear a beep.
Lift your handset and begin speaking.