Filter
Top Products
With a BIS-34D Console
NOTE: If you must dial 0 or 1 before dialing a long distance call,
begin the following procedure with step 5. If you do not dial 0 or 1
before dialing a long distance call, begin with step 1.
1 Touch Speaker.
2 Check the lights next to your line buttons.
Green lights indicate that the
system uses a toll prefix to detect a long distance call placed on this line.
If you don’t dial toll prefixes in your area, no green lights should be on.
3 Touch each line button until the light next to it shows the appropriate
code:
Steady green on
= system uses toll prefixes to defect long distance calls
Green light
off
=
system detects long distance calls by urea code only
4 Touch Speaker.
5 Touch Adm Tel.
6 Touch the Auto Intercom button of the voice terminal you want to restrict.
7 Touch Speaker until the green light beside it shows the kind of call
restriction you want the voice terminal to have.
Steady green light on
= Unrestricted (all calls permitted)
Flashing green light
=
Toll restricted (local and intercom calls only)
Green light off = Outward restricted (intercom calls only).
8 Repeats steps 6 and 7 for each voice terminal you want to restrict.
9 If there are voice terminals in the system that will have the same call
restrictions, use the following shortcut to give another voice terminal the
same call restrictions as one you have already set up. However, be aware
that when you copy call restrictions, you also copy line and line pool
assignments and Dial Access to Line Pools from the original voice
terminal.
a Touch the Auto Intercom button of the new voice terminal.
b Touch Recall.
The
red light next to
Adm Tel
flashes.
c Touch the Auto Intercom button of the original voice terminal.
The red light stops flashing when the copy is complete.
10 Touch Adm Tel and go on to another procedure, or leave administration
mode.
Camp On
DESCRIPTION
You can use the Camp On feature to transfer an outside call to a busy voice
terminal. The call stays on hold until the voice terminal becomes available,
then rings through automatically. Camp On makes it unnecessary to place
the call on hold, recheck the busy voice terminal until it becomes available,
and then transfer the call.
MERLIN II System Features
2-35