Filter
Top Products
System Renumbering
DESCRIPTION
At some point, you may need to change modules in the control unit. If you
replace a module with one of a different type, you must readminister the
system to reassign numbers to lines and stations. Changing station modules
may also require readministration of features that are related to analog
stations only, such as attendant positions and the Voice Announcement to
Busy Voice Terminal feature.
For more information about different types of modules, see “Control Unit
Modules” in “Accessory Equipment. ”
CONSIDERATIONS
ADMINISTRATION
If you add a line or station module in the control unit, renumbering is not
necessary. However, you will need to assign the additional lines and stations
to individual voice terminals.
To renumber the system, enter administration mode and follow these steps:
With a MERLIN II System Display Console
1 From the administration menu, touch
[System], [More] .
2 Touch [Renumber] .
You see a message showing that the system is performing renumbering.
3 When the administration menu appears, go on to another procedure, or
leave administration mode.
With a BIS-34D Console
1 Touch Message.
2 Dial #299.
3 Wait for the lights next to Adm Pool, Adm Tel, Message, and Speaker to
begin flashing, which indicates that the renumbering process is complete.
4 Go on to another procedure, or leave administration mode.
2-152 MERLIN II System Features