Filter
Top Products
System
DESCRIPTION
Size
The MERLIN II system can be set for two different sizes: small and large.
CONSIDERATIONS
ADMINISTRATION
The small setting is for systems administered for eight or fewer lines and
20 or fewer voice terminals.
With small systems, the administrator and
attendants typically use a BIS-34D voice terminal with display as a
console.
The large setting is for systems administered for more than eight lines or
more than 20 voice terminals. This size system can accommodate up to
56 lines and 72 voice terminals. The administrator and attendants use a
MERLIN II System Display Console.
If the administrator changes the system size designation from small to large,
or vice versa, on a running system, the line and feature assignments change
on all attendant consoles.
To specify system size, enter administration mode and follow the
appropriate procedure, below.
With a MERLIN II System Display
1 From the administration menu,
Console
touch [System] , [Size] .
2 Touch
[Small] or [Large] as appropriate for your system.
3 Touch Conference to return to the administration menu, or leave
administration mode.
With a BIS-34D Console
1 Touch Message.
2 Dial #201 and wait for the 2-beep signal to begin.
3 Dial the appropriate code:
For a small system, dial 0.
For a large system, dial 1.
4 Wait for the lights next to Adm Pool, Adm Tel, Message, and Speaker to
flash. At this signal, go on to another procedure or leave administration
mode.
MERLIN II System Features
2-153