Filter
Top Products
Resetting the Printer with a MERLIN II System Display Console
Follow the procedure below if the printer doesn’t form feed automatically and
the report heading appears anyplace but at the top of the page.
1 From the administration menu, touch
[Options], [Record], [New Page] .
2 Touch Conference to return to the administration menu, or leave
administration mode.
Resetting the Printer with a BIS-34D Console
Follow the procedure below if the printer doesn’t form feed automatically and
the report heading appears anyplace but at the top of the page.
1 Touch Message.
2 Dial #399.
3 Touch Message and go on to another procedure, or leave
mode.
administration
Call Restriction
DESCRIPTION
When the system is first installed, people can use their voice terminals to
place intercom, local, and toll calls. However, the administrator can assign
either of two types of call restrictions for selected voice terminals:
● Outward Call Restriction. Restricts voice terminals so
intercom calls.
● Toll Call Restriction. Restricts voice terminals so they
intercom and local calls.
they can place
only
can place only
CONSIDERATIONS
ADMINISTRATION
● If the call restrictions are too limiting, the administrator can set up one or
more allowed list, lists of numbers that individuals may call beyond the
established restrictions. (See “Allowed Lists. ” )
● Even though a voice terminal is restricted in placing calls, the user can still
receive all types of incoming calls.
Someone with a restricted voice
terminal can bridge onto any call or conference call in progress.
To restrict voice terminals to local calls only, the system must be able to
identify toll calls as people dial them.
The System Configuration Form shows
which lines in your system, if any, do not require a toll prefix
(0 or 1) for long
distance calls. If you have lines on which it is not necessary to dial a toll
prefix, you need to identify those lines before you assign Call Restrictions.
Enter administration mode and follow the appropriate procedure(s) below to
set up or change Call Restriction.
MERLIN II System Features
2-33