Filter
Top Products
Administration Procedure
Call restrictions and allowed lists:
To assign outward and toll call
restrictions to voice terminals:
NOTE: If you do not need to dial a toll
prefix (0 or 1) to place a long distance
call, perform steps 1 and 2 below.
If you use a toll prefix, just perform
step 2 below.
1 To set lines to identify long
distance calls by area code only
2 To assign call restrictions to voice
terminals
To copy line assignments and call
restriction assignments from one voice
terminal to another
Do This
1
2
3
1
2
3
4
5
6
1
2
3
4
5
6
7
Reach screen via [Lines], [TollType] .
Touch line buttons:
Steady green on =
toll calls detected by toll prefix only
Green off =
toll calls detected by area code or toll prefix
Touch Conference to return to the administration menu.
Reach screen via
[Stations], [Restrct] .
Touch Auto Intercom button for voice terminal.
Touch
[Enter] .
The Speaker button lights as follows:
Steady green on =
all calls permitted (unrestricted)
Flashing
green
= local and intercom calls and calls to numbers on
assigned lists permitted (toll call restriction)
Green
off =
intercom calls and calls to numbers on assigned lists
permitted (outward call restriction)
Touch the appropriate button for the restriction you want on this
voice terminal:
[NoRestr]
= unrestricted
[Local] = toll call restriction
[Intercom] =
outward call restriction
Repeat steps 2 through 4 for as many voice terminals you want
to restrict.
Touch Conference to return to the administration menu.
Reach screen via
[Stations], [Copy] .
Touch Auto Intercom button for voice terminal you want to
copy
from
.
Touch [Enter].
Touch Auto Intercom button for voice terminal that you want to
copy to.
Touch
[Next] to select another voice terminal to copy to.
Touch
[Enter] to choose a new voice terminal to copy from.
Touch Conference to return to the administration menu.
3-30 Menu-Driven Administration Procedures