Filter
Top Products
e Touch [Enter].
You hear a 2-beep signal to let you know that the copy procedure is complete.
f
Repeat steps b through e for each voice terminal for which you want to
copy line assignments.
g Touch
[Exit] to return to the Stations screen.
5 Touch
[LinePool] and repeat steps 2 through 4 to assign additional lines or
pools to buttons.
6 Touch Conference to return to the administration menu, or leave
administration mode.
Assigning Voice Terminals Dial Access to Line Pools
1
2
3
4
5
6
To assign Dial Access to Line Pools to voice terminals, touch these buttons
from the administration menu:
[Stations] , [DailAcc] .
Touch the Auto Intercom button for the voice terminal.
Touch
[Enter] .
NOTE: If the voice terminal is being used, the message, “station busy -
please wait, ”
shows on your display.
You must either wait until the
station becomes available or try again later.
Touch the line buttons until the correct code shows:
Steady green on
= voice terminal has Dial Access to the pool containing the
line
Green off = voice terminal doesn‘t have Dial Access to the pool containing the line
If you want to duplicate the Dial Access to Line Pool assignments on
another voice terminal, use the following shortcut:
NOTE: Be aware that when you copy line assignments, you also copy call
restrictions and allowed-list permissions. Be sure you want the two voice
terminals to be identical in these respects before using this Copy
procedure.
a Touch [Copy] .
b In response to the prompt, touch the Auto Intercom button of the
station you are copying from.
C Touch [Enter] .
d In response to the prompt, touch the Auto Intercom button of the
station you are copying to.
e Touch
[Enter].
You hear a 2-beep signal to let you know that the copy procedure is complete.
f Repeat steps b through e for each voice terminal for which you
copy line assignments.
g Touch
[Exit] to return to the Stations screen.
want to
Touch
[DialAcc] and repeat steps 2 through 4 to assign Dial Access to
additional voice terminals.
Touch Conference
to return to the administration menu, or leave
administration mode.
MERLIN II System Features
2-95