Filter
Top Products
PROGRAMMING
To disable or enable Ringing/Idle Line Preference, enter programming mode
and follow these steps:
1 Touch a line button.
2 Dial *343 to enable Ringing/Idle Line Preference or *344 to disable it-
HOW TO USE
3 Leave programming mode.
When you receive an outside call:
1 Lift your handset or touch Speakerphone.
If you have Ringing/Idle Line Preference,
the MERLIN II system connects you to the
ringing line.
2 If you have dialed this feature, touch the line button for the incoming call.
Ringing-on-Transfer
DESCRIPTION
When someone within the MERLIN II system transfers a call, the person is
automatically connected to Music-on-Hold, if the system has the feature.
However, the system administrator may choose to administer the Ringing-
on-Transfer feature so that the caller hears ringing instead,
CONSIDERATIONS
ADMINISTRATION
The system is factory-set to connect a person to Music-on-Hold when the
person’s call is transferred.
To administer Ringing-on-Transfer or change from Music-on-Hold to Ringing-
on-Transfer, enter administration mode and follow the appropriate procedures
below.
With a MERLIN II System Display Console
1 From the administration menu, touch these buttons:
[More], [Options],
[More]
, [Feedback] .
2 Touch [Music] , or [Ringback]
3 Touch Conference to return to the administration
administration mode.
menu, or leave
With a BIS-34D Console
1 Touch Message.
2 Dial #314, then perform one of the following operations:
If you want Music-on-Hold, dial 0.
If you want Ringing-on-Transfer, dial 1.
MERLIN II System
Features
2-139