Filter
Top Products
Square Line Configuration
See “Line Assignments in Square Systems”
Stopwatch
DESCRIPTION If you want to start and stop the timer on your 7406D voice terminal—to time
how long you spend on a call, for example- you can use your display and
the Stopwatch feature.
When you touch a programmed Stopwatch button,
the Stopwatch activates the timer on your display screen.
CONSIDERATIONS
PROGRAMMING
HOW TO USE
● This feature can be used only with the 7406 display voice terminal.
● The Stopwatch feature starts the clock at :00 on the display and will count
to a maximum of 9:59:59 (hours: minutes: seconds). When you touch the
Stopwatch button on your voice terminal to stop the timer, the display
disappears immediately.
To program a Stopwatch button for your display voice terminal, label a
button, enter programming mode, and follow these steps:
1 Touch the button you want to program.
2 Dial *92.
3 Program another feature, or leave programming mode.
When you want to start the timer on your display:
1 Touch Stopwatch.
The timer on your display starts.
2 When you are finished, note the elapsed time and record it, if necessary.
3 Touch Stopwatch to turn off the display.
MERLIN II System Features
2-151