Filter
Top Products
HOW TO USE
Follow these steps to use the Camp On feature:
1
2
If the voice terminal to which you are transferring a call is busy and the
caller is willing to wait, touch Camp On or dial #57.
Touch the Auto Intercom button or dial the intercom number of the voice
terminal to which you are transferring the call.
NOTE: You must enter this information within your system’s transfer
return interval or Camp On will be denied.
How are you notified of a Camp On call depends on what kind of telephone
you have.
● If you have a MERLIN II system voice terminal, an abbreviated ring tells
you that a Camp On call is waiting,
● If you have a basic telephone, you won’t be notified that a Camp On call
is waiting. The Camp On call rings through automatically, however, as
soon as your telephone becomes available.
Centralized Programming
DESCRIPTION
The Centralized Programming feature lets administrators program features
onto individual voice terminals directly from the administrator/attendant
CONSIDERATIONS
ADMINISTRATION
console. This
programming,
voice terminal
means you don’t have to go to each voice terminal to do the
although you do need
are labeled correctly.
to make sure the feature buttons on the
● If you use Centralized Programming to assign optional features to a
7406 voice terminal, keep in mind that buttons on this type of voice
terminal are in different positions than they are on the analog voice
terminals. Figures 2-1 and 2-2 are diagrams of the buttons on the analog
administrator/attendant console and the corresponding buttons on the
digital 7406 voice terminal.
● The voice terminal that you are programming must be idle. If the
voice terminal is busy or in program mode, you hear a beep at the
administrator/attendant console. You cannot program the voice terminal
until it becomes idle.
● Once you have begun Centralized Programming, the voice terminal that
you are programming beeps every five seconds to remind the user that he
or she cannot use the terminal until you have completed the programming
from your console. Any callers get a busy signal.
To program features onto a voice terminal the administrator/attendant
console, enter administration mode and follow the appropriate procedure
below.
MERLIN II System Features
2-37