Filter
Top Products
5 To set the time when Night Service should go off, touch [Stop] .
.-
6 Dial the number of the day of the week for which you are setting a time
(Sunday =0, Saturday =6).
7 Perform one of the following operations:
To remove the existing automatic stop time for this day, touch
[Enter] .
To set or change the stop time, dial two digits for the hour and two
digits for the minute, in the 24-hour format, then touch
[Enter] (For
example, if you want Night Service to go off at 8:00 a.m., dial 0800. )
8 To activate or deactivate Night Service with Time Set, touch
[DayofWk] .
9 Perform the appropriate action:
To activate timer-controlled operation of Night Service, dial the code
for the current day of the week (O= Sunday, 6= Saturday) .
To suspend timer-controlled operation of Night Service, dial 9.
10 Touch Conference to return to the administration menu or leave
administration mode.
Night Service Iformation Report
If you have a printer attached to your
system for the Call Report (SMDR) feature, you can get a Night Service
Information Report. It shows group assignments, the password, the allowed
list
for
1
2
3
of emergency telephone numbers, the Exclusion list, and on and off times
Night Service with Time Set.
From the administration menu, touch these buttons:
[More], [More],
[Print], [More], [More], [More].
Touch [NiteSrv] to begin printing.
Touch Conference to return to the administration menu or leave
administration mode.
With a BIS-34D Console
Follow the appropriate procedures below to administer your system’s Night
Service options.
Night Service with Group Assignment
To add voice terminals to or remove
them from Night Service groups:
1
2
3
4
5
6
Touch Message.
Dial # 307.
Dial the intercom number of the attendant for whom you are setting up or
changing a Night Service group.
Touch the Auto Intercom button of each voice terminal you want to add to
or remove from this attendant’s group until the light beside the button
shows the appropriate code.
Green light on =
voice terminal is included in the Night Service group
Green light off =
volce terminal is not included in the Night Service group
Repeat steps 3 and 4 for each Night Service with Group Assignment
group you want to set up or change.
Go to step 2 of another Night Service administration procedure for the
BIS-34D console, or leave administration mode.
MERLIN II System Features
2-119