Filter
Top Products
ADMINISTRATION
PROGRAMMING
●
●
The Forced Account Code Entry feature applies to outgoing calls only.
You may use the standard Account Code Entry feature to associate an
account code with an incoming call.
Forced Account Code Entry can be administered for basic Touch-Tone
telephones in all systems except systems administered for- behind-switch
operation. People who have basic telephones administered for Forced
Account Code Entry follow a different procedure for placing outside calls
than do people with MERLIN II system voice terminals. The feature
cannot be used with rotary telephones.
To assign the Forced Account Code Entry feature to voice terminals, enter
administration mode and follow the appropriate procedure below:
With a MERLIN II System Display Console
1 From the administration menu, touch these buttons:
[Stations], [More],
[Account]
.
2 Touch the Auto Intercom button of each voice terminal for which you
want to assign or remove this feature until the light next to the button
shows the appropriate code.
Green light on =
voice
terminal has Forced Account Code Entry
Green light off = voice terminal doesn‘t have Forced Account Code Entry
3 Touch Conference to return to the administration menu, or leave
administration mode.
With a BIS-34D Console
To
1
2
3
4
To
assign the Forced Account Code Entry feature to voice terminals:
Touch Message.
Dial #319.
Touch the Auto Intercom button of each voice terminal for which you
want to assign or remove this feature until the light next to the button
shows the appropriate code.
Green light on =
voice terminal has Forced Account Code Entry
Green light off = voice terminal doesn‘t have Forced Account Code Entry
Touch Message and go on to another procedure, or leave administration
mode.
program an Account Code Entry button, label a button with lights, enter
programming mode, and follow these steps:
1 Touch the button you want to program.
2 Dial *82.
3 Program another feature, or leave programming mode.
2-68 MERLIN II System Features