Filter
Top Products
To
1
2
3
start the timer for calls you need to time:
Touch Time/Timer.
Touch Start to reset the Timer to 00:00 and start the Timer.
When you are finished using the Timer, touch Stop.
When you want to return to the Clock/Calendar display, which shows the
time, day, and date:
1 Touch Time/Timer.
Clock/Date, Timer, and Alarm (The MERLIN II System Display Console)
The time-keeping features on the display console allow you to set the clock
and date, an alarm, and a timer. To help you do this, there are five buttons
below the display screen.
You press Clock Functions to get into this mode.
As you follow the procedures for setting the time-keeping features, the
second line of the display will show you the function of each button. Touch
the button below the label you want to use for the procedure. In the example
shown below, you would touch the button below the label, Start, if you want
to start the timer, or touch the button below the label, Stop, when you want
to stop the timer.
Timer Functions
9:30a 00:00
Start
stop
Reset
EXIT
❑ ❑ ❑ ❑ ❑
Setting the Clock and Date
When you are not using your display to help
you with programming or administration,
or testing your console, the display
shows the time and date on the first line. (This is the screen that you will
usually see. )
9:14a Tue 11-04
❑ ❑ ❑ ❑ ❑
You can reset the time, day, and date on your display by following these
procedures.
1 Touch Clock Functions.
You see the following Clock Functions display:
Clock Functions
9:30a Tue 11-04
Timer
Alarm
Set
❑ ❑ ❑ ❑ ❑
2-52 MERLIN II System Features