Filter
Top Products
PROGRAMMING
HOW TO USE
5
To associate line or line pools with this group, touch the line buttons until
the lights show the appropriate code:
6 Touch
group
7 Touch
Green light on =
line is assigned to the group
Green light off = line isn‘t assigned to the group
[GrpCall] and repeat steps 2 through 5 for each Call Distribution
you want to administer.
Conference to return to the administration menu.
8 To get a printout of the Call Distribution groups, touch [More], [More],
[Print]
, [More] , [More] , [GrpCall] .
9 Touch Conference to return to the administration menu, or leave
administration mode.
With a BIS-34D Console
Follow these steps to set up Call Distribution groups:
1 Touch Message.
2 Dial #87.
3 Dial the number of the Call Distribution group (0 through 5).
4 To
5 To
6 To
assign voice terminals to the group, touch the Auto Intercom button(s):
Steady
green on = voice terminal is in group
Green off = voice terminal is not in group
associate lines with the group, touch line button(s):
Steady green on
=
line is assigned to group
Green off
=
line is not assigned to group
get a printout, dial #906 and wait for the beep.
7 Touch Message.
8 Go on to another procedure or leave administration mode.
T
O program a button for a Call Distribution group, label a button, enter
programming mode, and follow these steps:
1 Touch the button you want to program.
2 Dial *91 plus a Group Call Distribution code (870 through 875 or a code
assigned through Flexible Numbering).
3 Program another feature, or leave programming mode.
To place an intercom call to a Call Distribution group:
1 Touch Intercom-Voice or Intercom-Ring.
2 Lift your handset or touch Speakerphone.
3 Touch the button for the group or dial the appropriate code.
4 When you hear a beep or when someone answers, begin speaking.
MERLIN II System Features
2-71