Filter
Top Products
PROGRAMMING
. .
HOW TO USE
places, such as lobbies or conference rooms, not to ring. A line programmed
for no ring does not ring on outside calls, but does ring for transferred and
intercom calls.
YOU can assign immediate, delayed, or no ring to individual lines or line
pools on your voice terminal or you can program the same option for all your
lines and line pools.
You assign Abbreviated or Repeated Ringing to all your
lines or line pools.
To program line ringing options, enter programming mode and follow these
steps:
1 Take the appropriate action:
To assign immediate, delayed, or no ringing to an individual line or
line pool button, touch the button and dial the appropriate code:
—
Dial *35 for No Ring.
The red light next to the line button goes off.
—
Dial ’36 for Delayed Ring.
The
red light next to the line button flashes.
—
Dial *37 for Immediate Ring.
The red light next to the line button goes on steady.
To assign immediate, delayed, or no ring to all the lines and line pools
at your voice terminal, touch any line button and dial the code for the
type of ringing you prefer:
– Dial *345 for No Ring.
The red lights next to all the line buttons go off.
—
Dial *346 for Delayed Ring.
The red lights next to all the line buttons flash.
– Dial *347 for Immediate Ring.
The red lights next to all the line buttons go on steady.
2 To select Abbreviated or Repeated Ringing for incoming calls to a busy
voice terminal, touch one of your line or line pool buttons and dial the
appropriate code:
Dial *341 for Abbreviated Ringing.
Dial *342 for Repeated Ringing.
3 Program another feature, or leave programming mode.
Even if you program the lines on your voice terminal not to ring, you can tell
if a call comes in for you because the green light next to the line button still
flashes. To answer the call:
1 Touch the line button next to the flashing green light.
2 Lift your handset or touch Speakerphone.
MERLIN II System
Features
2-141