Filter
Top Products
2 Touch the programmable feature button.
When you are finished using the programmable feature button, the light goes
off next to the feature button and the Shift button.
The Shift Button on the Display Console
To use a Shift button on the display console:
1 Touch the appropriate Shift button for the voice terminal or line you want
to access.
The red light next to the Shift button goes on steady.
Simultaneous Voice and Data Calls
DESCRIPTION
The Simultaneous Voice and Data feature allows you to set up a connection
between your own computer terminal and a local or remote host computer.
You can continue to place or receive calls without interrupting your data call
to the computer.
For information about using digital data with the MERLIN II system, see the
Data Communications Guide for the
MERLIN II System.
CONSIDERATIONS
ADMINISTRATION
●
●
●
●
●
To
In order to use this feature, you must have a General Purpose Adapter
and a modem connected to your analog voice terminal.
In order for a voice terminal to use this feature, the system administrator
must assign the voice terminal two consecutive station jacks on the control
unit. This requires special wiring. (See “Installation” in the
MERLIN II
System Installation and Administration Manual. )
The system administrator can assign either the Voice Terminal To Busy
Voice Terminal feature or the Simultaneous Voice and Data feature to a
voice terminal. Since both features require two consecutive station jacks,
a voice terminal cannot have both features. (See “Voice Announcement To
Busy Voice Terminal. ” )
The administrator should assign the voice/data station pair to an odd-
numbered analog station jack and the next higher (even) numbered analog
station jack. The intercom number of the voice terminal connected to
these jacks is the same as the odd-numbered intercom station jack.
You cannot use your Hands-Free Unit when the Simultaneous Voice and
Data feature has been administered.
allow someone to conduct voice and data calls at the same time, enter
administration mode and follow the appropriate procedure below.
With a MERLIN II System Display Console
1 From the administration menu, touch these buttons:
[More], [More],
[Data],
[Vce Data] .
2-146 MERLIN II System Features