Filter
Top Products
With a MERLIN II System Display Console
NOTE: If a toll prefix is required on all your lines, skip the procedure
below and go on to
“Administering Call Restrictions. ”
Identifying Toll Types for Selected Lines
1 From the administration menu, touch
[Lines], [TollType] .
2 Touch the line buttons until the lights show the appropriate code:
Steady green on
= toll calls detected by toll prefix only
Green off
=
toll calls detected by area code or toll prefix
3 Touch Conference to return to the administration menu and go on to the
next procedure.
Administering Call Restrictions
1 From the administration menu, touch
[Stations], [Restrct].
2 Touch the Auto Intercom button for the voice terminal that you want to
restrict.
3 Touch [Enter] .
4 Touch the appropriate key for the restriction you want on this voice
terminal:
[NoRestr]
= unrestricted
[Local] = toll call restriction
[Intercom] =
outward call restriction
As you touch the appropriate key, the Speaker button shows one of these
codes:
Steady green on
=
all calls permitted (unrestricted)
Flashing green
= local and intercom calls and calls to numbers on assigned lists permitted
(toll call restriction)
Green off
=
intercom calls and calls to numbers on assigned lists permitted
(outward call restriction)
5 Repeat steps 2 through 4 for each voice terminal you want to restrict.
6 Touch Conference to return to the administration menu, or leave
administration mode.
Copying Line and Call Restriction Assignments
1
2
3
4
5
6
7
2-34 MERLIN II System Features
If you want to copy line assignments and Call Restriction assignments
from one voice terminal to another, touch
[Stations], [Copy] .
Touch the Auto Intercom button for the voice terminal you copy to copy
from.
Touch [Enter] .
Touch the Auto Intercom button for the voice terminal that you want to
copy to.
Touch
[Next] to select another voice terminal to copy to.
Touch
[Enter] to choose a new voice terminal to copy from.
Touch Conference to return to the administration menu, or leave
administration mode.