Filter
Top Products
2
3
To
Plug one end of the modular cord into the jack labeled C.U. # on the
SAA and the other end into the voice terminal’s modular wall jack.
Plug the modular cord from the extra alert device into the jack labeled
Alerter on the SAA.
have the extra alert device turn on when a call rings at the appropriate
voice terminal, turn the SAA to the On position.
If you want to use more than one extra alert device alternately:
1 Turn the extra alert switch’s knob to the appropriate On position labeled
(1) or (2). For example, if you connect a bell to position (1) and a strobe to
position (2), turn the control switch to position
(1) to operate the
to position (2) to operate the strobe.
If you want to use more than one extra alert device simultaneously:
bell and
1 Turn the extra alert switch knob to the appropriate On position labeled (1)
or (2). For example, if you connect a bell
and a strobe to a line bridging
adapter and the adapter to position (1) on the SAA, turn the control
switch to this position.
2-186 MERLIN II System Features