Filter
Top Products
Administration Procedure
Do This
Voice terminal hne/line pool assignments
in pooled systems:
To assign lines to line pools
1 Touch Adm Pool.
2
If green light next to
Adm Pool
is steady and you hear two beeps,
go on to step 3. If not, wait for 2-beep signal or try again later.
3 Dial pool code.
4 Touch line buttons:
Steady red on = line in pool
Red off = line not in pool
5 Touch Adm Pool.
To assign lines and line pools to voice
1 Touch Adm Tel.
terminals
2
Touch Auto Intercom buttons for voice terminal.
3
If steady green light shows next to
Adm Tel
and you hear two
beeps, go on to step 4. If not, wait for 2-beep signal or try again
later.
4 Touch line buttons:
Steady green on = line or pool assigned to voice terminal
Green off = line or pool not assigned to voice terminal
5 Touch Adm Tel.
To assign Dial Access to Line Pools to
1 Touch Adm Tel.
voice terminals
2
Touch Auto Intercom button for voice terminal.
3
If steady green light shows next to
Adm Tel
and you hear two
beeps, go on to step 4. If not, wait for 2-beep signal or try again
later.
4
Touch same Auto Intercom button again.
5 Touch line buttons:
Steady green on =
voice terminal has Dial Access to pool containing
line
Green off =
voice terminal doesn‘t have Dial Access to pool
containing line
6 Touch Adm Tel.
Button Code Administration Procedures 3-5