Filter
Top Products
Voice Announcement To Busy Voice Terminal
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
The system administrator can assign some voice terminals two consecutive
station jacks on the control unit so that people at these voice terminals can
receive voice announcements while they are busy on a call.
The system administrator must assign the voice terminal two consecutive
station jacks on the control unit. This requires special wiring. (See Section
3, “Installation” in the MERLIN II lnstallation and Administration Manual.)
The jacks must be an odd-numbered analog station jack and the next
higher even-numbered analog station jack. The odd-numbered station jack
provides the station’s intercom number.
The system administrator can assign either the Voice Announcement To
Busy Voice Terminal feature or the Simultaneous Voice and Data feature to
a voice terminal. A voice terminal cannot have both features.
To identify any station jacks in voice/voice pairs, enter administration
mode
and follow one of the procedures below.
With a MERLIN II System Display Console
1 From the administration menu, touch
[Stations], [More], [More] [VceSgnl] .
2 Touch either of two adjacent Auto Intercom buttons until the green lights
next to both buttons show the appropriate code:
Green light on =
station jack is part of voice/voice pair
Green light off = station jack is not paired
3 Touch Conference to return to the administration menu, or leave
administration mode.
With a BIS-34D Console
1 Touch Message.
2 Dial # 210.
3 Touch either Auto Intercom button for the voice/voice pair until the green
lights next to both buttons show the appropriate code:
Steady green light on = station jack in voice/voice pair
Green ligh off = station jack not in voice/voice pair
4 Touch Message and go on to another procedure, or leave administration
mode.
2-166 MERLIN II System Features