Filter
Top Products
5 Touch Message and go on to another procedure, or leave administration
mode.
Voice Announcement Enable/Disable
DESCRIPTION
Ordinarily, people can use the MERLIN II system intercom feature to
announce calls through your voice terminal speaker. However, if you do not
want a voice announcement to interrupt your work, you can use the Voice
Announcement Disable feature to have intercom calls at your voice terminal
ring instead.
CONSIDERATIONS
PROGRAMMING
If you use the Voice Announcement Disable feature on a 10-Button
Hands-Free Answer on Intercom (HFAI) voice terminal or on any voice
terminal with a speakerphone, you deactivate the automatic answering
feature. However, the Voice Announcement Disable feature does not
affect voice terminals with connected Hands-Free Units.
If you have a 7406 voice terminal, you can place both ringing and
announced intercom calls, but you can receive only ringing intercom calls.
Therefore, you do not need to program the Voice Announcement Disable
feature.
When you use the Voice Announcement
Group Page feature.
To prevent or allow voice announcements at
programming mode and follow these steps:
1 Touch Intercom-Voice.
2 Dial one of the following codes:
Disable feature, you disable the
your voice terminal, enter
To allow voice announcements, dial *37.
The green light beside
Intercom-Voice
is on.
To prevent voice announcements, dial *35.
The green light beside Intercom-Voice is off.
3 Program another feature, or leave programming mode.
MERLIN II System Features
2-165