Filter
Top Products
Night Service with Outward Restriction
The following procedure describes
how to set up or change your password, list of emergency numbers, or
Exclusion list.
1
2
3
4
5
Touch Message.
To administer a password, dial # 309, then take one
➤ To create a new password or replace an existing
four digits (0 through 9).
To remove an existing password, touch Drop.
of these actions:
password, dial any
NOTE: Removing the password deactivates the Outward Restriction
feature. To restore Outward Restriction, you need to create a new
password.
To administer emergency telephone numbers, dial #310, then take one of
these actions for each number you want to add, change, or remove:
To add or change an emergency telephone number, dial the entry
number (0 through 9) of the telephone number on the allowed list,
then dial the number itself (maximum of 12 digits).
To remove an existing number, dial the entry number (0 through 9) of
the telephone number on the allowed list, touch Drop, and touch
Enter.
To assign voice terminals to the Night Service Exclusion list or remove
them from this list, dial # 308, then touch the Auto Intercom button of
each voice terminal until the light next to the button shows the
appropriate code.
Green light on =
voice terminal is assigned to the Exclusion list
Green light off = voice terminal is not assignd to the Exclusion list
Go on to step 2 of another procedure or leave administration mode.
Night Service with Time Set Follow the steps below to administer Night
Service with Time Set. If you want Night Service to stay on for a full day
(a Sunday, for example), don‘t set a start time or a stop time for that day.
NOTE: If you have not set the MERLIN II system clock, follow the
procedures in “Call Report” to set the time and date before you begin
to administer Night Service with Time Set. F
OllOW those steps
whenever you need to reset the system clock, when the time changes,
for example.
1 Touch Message.
2 For each day of the week in turn, set the time of day when you want
Night Service to go on automatically. You must perform both steps a and
b for each day.
a Dial the code for the
Sunday = # 3110
Monday = # 3111
Tuesday = #3112
day of the week for which you are setting a time.
Wednesday = # 3113
Friday = #3115
Thursday = #3114 Saturday = #3116
2-120 MERLIN II System Features