Filter
Top Products
5
6
7
8
9
10
Touch Enter.
To set the current date, dial # 301.
Dial two digits for the month (01 through 12).
Dial two digits for the day (01 through 31).
Dial two digits for the year (00 through 99).
For example, if the date is August 24, 1988, dial #301 082488.
Check the date shown on the display. If it isn’t correct, enter the
information again.
Touch Message and go to another procedure or leave administration
mode.
Specifying Call Report Options with a MERLIN II System Display Console
1
2
3
4
5
6
7
8
9
10
From the administration menu, touch [More], [Options], [More], [SMDR] .
Touch
[CallLen] .
Dial the minimum call duration in minutes (00 through 99).
Touch
Touch
Touch
[In/Out]
[Enter].
[CallRep].
the appropriate key for the types of calls you want recorded:
=
record incoming and outgoing calls
[OutOnly]
= record outgoing calls only
Touch Conference to return to the administration menu.
To get a printout of your Call Report options, touch
[More], [More], [Print],
[More],
[More] .
Touch
[SMDR] to begin printing.
Touch Conference to return to the administration menu, or leave
administration mode.
Specifying Call
Report Options with a BIS-34D Console
1
2
3
4
5
Touch Message.
Dial #391, then perform the appropriate step:
Dial 0 if you want only outgoing calls reported.
Dial 1 if you want outgoing and incoming calls reported.
To specify a minimum call duration other than 1 minute for call reporting,
dial # 390, then dial the number of minutes (00 through 99). If you dial
CO, the minimum call duration will be 10 seconds.
For example, to specify a minimum duration of two minutes, dial #390 02.
To get a printout of your Call Report options, dial #905 and wait for the
beep.
Touch Message and go on to another procedure, or leave administration
mode.
2-32 MERLIN II System Features