Filter
Top Products
Administration Procedure
Direct Inward System Access:
To assign lines for DISA
To specify a password for DISA users
To set up DISA outward restriction
To get a printout of DISA options
Disconnect interval for held calls
Extended Station Status:
To specify the ESS mode
To put consoles in and out of ESS
Display mode
Do This
1 Touch Message.
2 Dial # 323.
3 Touch line button:
Steady green on
=
line used for DISA
Green off = line not used for DISA
4 Touch Message.
1 Touch Message.
2 Dial #324.
3
Dial a 4-digit password or touch
Drop.
4 Touch Message.
1 Touch Message.
2 Dial #325.
3
Dial 0 for outward restriction or 1 for no restriction.
4 Touch Message.
1 Touch Message.
2 Dial #905 and wait for beep.
3 Touch Message.
1 Touch Message.
2 Dial # 303.
3 Touch line buttons:
Steady green on
= line drops held call on long (450 millisecond)
signal (default)
Green off = line drops held call on short (50 millisecond) signal
4 Touch Message.
1 Touch Message.
2 Dial #329.
3
Dial 0 for Hotel/Motel or 1 for CMS mode.
4 Touch Message.
1 Touch Message.
2 Dial #330.
3 Touch Auto Intercom button(s):
Steady green on =
console in display mode
Green light flashing =
console not in
display
mode
4 Touch Message.
Button Code Administration Procedures
3-11