Filter
Top Products
PROGRAMMING
b Perform one of the following operations:
To remove the existing automatic start time for this day, touch
Drop.
To set or change the start time, dial two digits for the hour and
two digits for the minute, in the 24-hour format. For example, if
you want Night Service to go on at 5:30 p.m., dial 1730.
3 For each day of the week in turn, set the time of day when you want
Night Service to go off automatically. You must perform both steps a and
b for each day.
a Dial the code of the day of the week for which you are setting a time.
Sunday = #3120
Wednesday = # 3123
Friday = # 3125
Monday = # 3121
Thursday = # 3124
Saturday = #3126
Tuesday = # 3122
b Perform one of the following operations:
To remove the existing automatic stop time for this day, touch
Drop,
To set or change the stop time, dial two digits for the hour and
two digits for the minute, in the 24-hour format. For example, if
you want Night Service to go off at 8:00 a,m., dial 0800.
4 Perform the appropriate step to activate or deactivate Night Service with
Time Set:
To activate timer-controlled operation of Night Service,
for the current day of the week:
Sunday = #3130
Wednesday = #3133
Friday =
Monday = # 3131
Thursday = # 3134
Saturday
Tuesday = #3132
dial the code
# 3135
= # 3136
To suspend timer-controlled operation of Night Service, dial # 3139.
5 Go to step 2 of another procedure for the BIS-34D console, or leave
administration mode.
Night Service /formation Report
If you have a printer, you can get a
Night Service Information Report. It shows group assignments, the password,
the allowed list of emergency telephone numbers, the Exclusion list, and on
and off times for Night Service with Time Set.
1 Touch Conference twice.
2 Touch Message.
3 Dial #907 and wait for the beep.
4 Leave administration mode.
The system attendant can program a Night Service button on his or her
console by entering programming mode, touching an available button, and
dialing *39.
MERLIN II System Features
2-121