Filter
Top Products
System components Page 55 of 466
Communication Server 1000E Installation and Commissioning
For detailed information about the ISP1100 Signaling Server, refer to
Signaling Server: Installation and Commissioning (NN43001-312).
Connectors
(front)
• The DB-9 serial port, the CD-ROM and floppy
drives are located on the unit’s faceplate.
• The DB-9 serial port can support a login session
for Command Line Interface (CLI) management.
• See Figure 6 on page 56.
Connectors
(rear)
• The TLAN network interface (P2) connects the
unit to a TLAN network interface on a Layer 2
Switch.
• The ELAN network interface (P1) connects the
unit to an ELAN network interface on a Layer 2
Switch.
• The DB-9 serial port can support a login session
for Command Line Interface (CLI) management.
• There are three ports not used for any CS 1000E
system function. Do not plug any device into these
ports.
• See Figure 7 on page 57.
CAUTION — Service Interruption
Do not connect maintenance terminals or modems to
the faceplate and I/O panel DB-9 male serial
maintenance port at the same time.
Table 2
ISP1100 Signaling Server profile (Part 3 of 3)
Property Description