Filter
Top Products
Page 32 of 466 Safety instructions
NN43041-310 Standard 01.11 October 2008
Lifting system equipment
Care should be exercised when lifting system components. If necessary, get
assistance to lift a component or install a component in a rack. The weight of
the system component can be found in the component profiles in “System
components” on page 39.
Before lifting or installing a component:
• Ensure that the planned location and the route to that location are free of
obstacles and debris.
• Determine the weight of the components (see component profiles in
“System components” on page 39).
• Get help with heavy components or components that are to be placed in
the upper section of a rack.
Handling circuit cards
Follow these precautions when handling circuit cards:
1 Unpack or handle cards away from electric motors, transformers, or
similar machinery.
2 Handle cards by the edges only. Do not touch the contacts or
components.
3 Set cards on a protective antistatic bag. If an antistatic bag is not
available, hold the card or set it in a card slot unseated.
4 Store cards in protective packing.
5 Do not stack cards on top of each other unless they are packaged.
6 Wear a properly connected antistatic wrist strap when you work on the
equipment.
CAUTION WITH ESDS DEVICES
Static electricity can damage circuit cards. Wear an
antistatic wrist strap when handling circuit cards or their
components.