Installing and configuring IP Phones Page 408 of 488
Communication Server 1000E Installation and Configuration
• Procedure 114: "Displaying registered IP Phones in Element Manager"
on page 439
Configuring VoIP bandwidth management zones
Follow Procedure 102 to configure the VoIP bandwidth management zones.
For more details on bandwidth management zones, see IP Line: Description,
Installation, and Operation (553-3001-365).
VoIP bandwidth management zones can be configured with Element
Manager or using the CLI. For more information about Element Manager, see
Element Manager: System Administration (553-3001-332).
Procedure 102
Configuring VoIP bandwidth management zones using the CLI
1 Log in to the Call Server.
a. Enter the command:
LOGI
System response:
PASS?
b. Enter the default password:
0000
2 Access LD 117. Enter the command:
LD 117
3 Create a new zone with default parameters. Enter the command:
NEW ZONE 0
Note: LD 117 also includes DIS and ENL commands to disable or enable
a zone. When you create a zone, its default state is enabled. See
Table 50 on page 409 for the LD 117 zone commands.
4 Print zone and bandwidth information. Enter the command:
PRT ZONE.
