Filter
Top Products
Page 358 of 466 Installing the Main Distribution Frame
NN43041-310 Standard 01.11 October 2008
4 Tighten the velcro straps when you have connected each cable to the
system.
5 Terminate all the 25-pair cables installed at the cross-connect terminal.
6 Label all the cables at the cross-connect terminal blocks according to the
card slot assignment plan.
7 Connect the AUX cable in the upper 9-pin connector located on the top
left-hand side of the Media Gateway. See Figure 155 on page 358.
Figure 155
AUX cable connector
AUX