Filter
Top Products
Installing a Signaling Server Page 217 of 466
Communication Server 1000E Installation and Commissioning
– Primary and Alternate NRS IP addresses for this networked
system. Refer to IP Peer Networking: Installation and
Commissioning (NN43001-313)
– NRS role, if applicable. Refer to IP Peer Networking:
Installation and Commissioning (NN43001-313)
Entering basic system parameters
Procedure 44
Entering basic system configuration parameters
1 Press the RST button on the faceplate of the CP PM Signaling Server.
This cold-reboots the Signaling Server and triggers the Install Tool on the
hard drive (see Figure 91)
Figure 91
Install Tool banner screen
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
#####
######### ########
########`` `#############
######## `` `#############
#######` ######```####
####### ######`` `### NORTEL NETWORKS
####### #####`` ####
####### #####` #### Communication Server 1000 Software
`#########` ####`
#######` ##### Copyright 2002 – 2006
`####### #####’
########## `###`
##``########## #
## `########################
`# `########################
###########################``
````````` ````####````
Please press <CR> when ready ... <CR>