Filter
Top Products
Page 332 of 466 Installing and configuring a Voice Gateway Media Card
NN43041-310 Standard 01.11 October 2008
Press the Retaining Pin into the hole until the pin clicks as it locks into
position (labeled 2 in Figure 139). The underside of the head of the
Retaining Pin should be flat against the card.
Figure 139
Inserting the Retaining Pin
7 Turn the card over to view the front of the card. Ensure the Retaining Pin
is in place, as shown Figure 140 on page 332.
Figure 140
Retaining Pin fully inserted
End of Procedure