Filter
Top Products
Page 228 of 466 Installing a Signaling Server
NN43041-310 Standard 01.11 October 2008
12 Press <CR> or enter y to confirm all parameters entered, n to re-enter all
parameters, or a letter a through l to change the value of the
corresponding system parameter. The configuration screens for a
Follower and Standalone Signaling Server - NRS are similar, showing the
same list of parameters, specifically:
• The screen for the Follower Signaling Server displays only the value
for the Hostname parameter; all other values are blank.
• The screen for the stand-alone Signaling Server displays values for
the Hostname, ELAN network interface, TLAN network interface, and
NRS parameters. The Node ID field is set to 0. The Call Server IP
field is set to 0.0.0.0.
The following message is displayed:
For future reference, the ELAN MAC address is:
"00:02:b3:c5:5l:c6".
Note: The ELAN network interface MAC address must be configured in
the Element Manager node configuration web page.
The Install Tool Main Menu screen appears (Figure 106):