Filter
Top Products
Page 240 of 466 Configuring the IPMG
NN43041-310 Standard 01.11 October 2008
Procedure 48
Configuring the IPMG (Element Manager)
1 In Element Manager, select IP Network > Media Gateways. Select the
appropriate Superloop Number and Shelf. Click Add.
Figure 111
Add IPMG
2 The preceding screen appears (see Figure 111). Enter the IP address,
zone number, and the Media Gateway type (in this case, a Media
Gateway Controller). Selecting “MGC” automatically fills in the remaining
fields (“CE”, “E1”, “E”, “CT”, “T2”, and “T”). Click Submit.
Note: The IP address entered here is the same IP address as the one
configured on the MGC in an earlier procedure.
The following screen appears (Figure 112 on page 241):
3 Enter the Gateway IP addresses and Voice LAN IP addresses. If the MGC
has DSP daughterboards connected, select the type and enter the IP
addresses.